Crochet Sunflower Table Runner Pattern

Introduction

Bring the warmth of autumn into your home with this elegant Crochet Sunflower Table Runner. Featuring oversized blooming sunflowers surrounded by richly textured leaves and connected with delicate crochet vines, this project creates a stunning centerpiece for farmhouse, rustic, cottagecore, and modern dining spaces alike.

The pattern is designed for intermediate crocheters who enjoy motif construction and decorative joining techniques. Individual flowers are worked separately before being joined into one flowing runner, making the project enjoyable to complete in stages. Whether displayed for Thanksgiving, everyday dining, or as a handmade gift, this heirloom-quality runner adds timeless charm to any table.

Finished dimensions can easily be adjusted by adding or removing sunflower motifs, allowing the design to fit coffee tables, dining tables, buffets, or console tables.

Difficulty
Intermediate
Time
12–18 Hours
Hook Size
3.5 mm (E/4)
Yarn Weight
DK (#3) Cotton
Finished Size
18 × 90 in

Gauge

Gauge Swatch (worked in double crochet)

22 double crochet stitches × 11 rows = 10 cm (4 inches)

Hook Used

3.5 mm (E/4)

Yarn Weight

DK (#3) Cotton Yarn

Finished Size

Approximately 18 x 90 inches (46 x 230 cm)


Materials

Yarn

Chocolate Brown — 180 yards

Cream — 420 yards

Rust Orange — 260 yards

Terracotta — 180 yards

Sage Green — 220 yards

Natural Beige — 80 yards


Supplies

3.5 mm crochet hook

Yarn needle

Scissors

Blocking mats

Rustproof pins

Stitch markers

Flexible measuring tape

Steam iron (optional)


Abbreviations

AbbreviationMeaning
chchain
sl stslip stitch
MRmagic ring
scsingle crochet
hdchalf double crochet
dcdouble crochet
trtreble crochet
ststitch
spspace
reprepeat
incincrease
BLOback loop only
FLOfront loop only
picotchain 3, slip stitch into first chain
RSright side
WSwrong side
FOfasten off

Pattern Notes

Magic Ring (MR): Wrap yarn around fingers to form an adjustable ring. Crochet stitches into the ring before pulling the tail tightly closed.

BLO (Back Loop Only): Work only through the back loop of the stitch to create texture.

FLO (Front Loop Only): Work only through the front loop of the stitch to create raised shaping.

Every round ends with a slip stitch unless otherwise stated.


Large Sunflower Motif

Make 3 Cream Flowers

Make 3 Rust Flowers


Round 1 (Center)

Using Chocolate Brown

Create a Magic Ring.

Chain 2 (does not count as stitch).

Work 16 dc into the ring.

Join.

(16 sts)


Round 2

Chain 2.

Work 2 dc into every stitch around.

Join.

(32 sts)


Round 3

Chain 1.

Work:

sc in next stitch

hdc in next

dc in next

Repeat around.

Join.

(32 sts)


Round 4 (Petal Bases)

Chain 3.

Skip next stitch.

sl st into following stitch.

Repeat around.

You should have sixteen chain spaces.

(16 chain spaces)


Round 5 (Large Petals)

Into each chain space work:

sc

hdc

3 dc

hdc

sc

Repeat around.

Join.

(16 petals)


Round 6 (Petal Texture)

Working BLO for this round only.

sl st into first petal.

Chain 2.

dc across each stitch around.

Join.

(112 sts)


Round 7 (Pointed Petals)

Each petal:

sc

hdc

dc

tr

tr

dc

hdc

sc

Repeat around.

Join.

(128 sts)


Round 8

Chain 1.

Work one sc into every stitch.

Join.

(128 sts)

Fasten off.

Block motif lightly.


Small Flower Motif

Make 2


Round 1

Using Chocolate Brown.

Magic Ring.

12 dc into ring.

Join.

(12 sts)


Round 2

Using Cream.

Chain 3.

Into each stitch work:

sc

hdc

dc

hdc

sc

Repeat around.

Join.

(12 petals)


Round 3

Using Rust.

Work one sc into every stitch around.

Join.

(60 sts)

Fasten off.


Center Rosette

Make 1


Round 1

Magic Ring.

10 sc.

Join.

(10 sts)


Round 2

2 sc in every stitch.

(20 sts)


Round 3

(sc, inc)

Repeat around.

(30 sts)


Round 4

Working FLO.

Chain 3.

Skip one stitch.

sl st into next.

Repeat around.

(15 loops)


Round 5

Each loop:

sc

hdc

3 dc

hdc

sc

Repeat around.

(15 petals)


Flower Blocking

Lightly mist each completed flower with water.

Pin every petal evenly so each flower measures approximately 12 inches (30 cm) across.

Allow to dry completely before assembly to ensure the runner lies perfectly flat.

Leaf Motif

Make 34–40 leaves depending on the desired fullness of your table runner.

  • 18 Sage Green
  • 10 Rust
  • 8 Terracotta
  • Extra leaves may be added for a fuller appearance.

Finished leaf size: approximately 4½ inches (11.5 cm) long.


Leaf Foundation

Chain 11.

Technique Note: The following round is worked around both sides of the foundation chain. Crochet down one side, place stitches into the end chain, then continue working along the opposite side of the same chain to form an oval.


Round 1

Beginning in the 2nd chain from hook:

1 sc

1 hdc

1 dc

2 dc in next stitch

1 tr

2 tr in next stitch

1 tr

2 dc in last chain

Working on the opposite side of the chain:

1 tr

2 tr

1 tr

2 dc

1 dc

1 hdc

1 sc

Join with sl st.

(24 sts)


Round 2

Chain 1.

Working BLO for this round only to create a center vein:

2 sc

2 hdc

4 dc

6 tr

4 dc

2 hdc

4 sc

Join.

(24 sts)


Round 3

Chain 1.

Work one sc in each stitch around.

At the leaf tip work:

(sc, ch2, sc)

This creates the pointed leaf tip.

Continue evenly around.

Join.

(26 sts)

Fasten off leaving an 8-inch tail for sewing.

Block every leaf before assembly.


Decorative Vine Connectors

The vines create the flowing structure that joins all motifs together.

Make as required.


Vine Strip

Chain 24.


Row 1

Beginning in second chain from hook:

1 sc in every chain.

Turn.

(23 sts)


Row 2

Chain 1.

Working BLO:

23 sc.

Turn.

(23 sts)


Row 3

Repeat Row 2.

(23 sts)


Row 4

Repeat Row 2.

(23 sts)

Fasten off.

Lightly steam so the strip remains straight.

Make approximately 18–22 vine strips depending on spacing.


Joining Mesh

The flowers are connected with open lattice arches.

Using Natural Beige yarn.


Joining Row

Attach yarn between two neighboring flowers.

Chain 9.

Slip stitch into opposite flower.

Chain 9.

Slip stitch into adjacent petal.

Repeat around until flowers are securely connected.

Each arch should measure approximately 2 inches (5 cm).

Maintain equal spacing throughout the runner.


Reinforcing Round

Work into every chain arch:

1 sc

5 dc

1 sc

Repeat around every joining arch.

Join.

Fasten off.


Decorative Connecting Loops

Between every large flower:

Chain 7.

Slip stitch into opposite chain space.

Repeat five times.

These loops become the attachment points for the leaves.


Border Around Connecting Mesh

Attach yarn anywhere.


Border Round

Chain 1.

Work:

1 sc in every stitch

3 sc into every outside corner

5 sc around every chain loop

Continue around the entire connecting mesh.

Join.

(Approximately 320 sts)


Leaf Placement Guide

Arrange all motifs before sewing.

Recommended layout:

Large Flower

↓

Four Leaves

↓

Small Flower

↓

Four Leaves

↓

Large Flower

↓

Four Leaves

↓

Large Flower

↓

Four Leaves

↓

Small Flower

↓

Four Leaves

↓

Large Flower

↓

Four Leaves

↓

Large Flower

Leaves alternate left and right to create a natural flowing appearance.


Sewing Leaves

Using long yarn tails:

Sew only the lower third of each leaf.

Leave the remaining two-thirds unattached.

This allows the leaves to lift naturally and create a realistic three-dimensional effect.

Space leaves approximately 1½ inches (4 cm) apart.


Joining Flowers

Lay every flower on a flat surface.

Distance between flower centers:

Approximately 13 inches (33 cm).

Join flowers using the lattice mesh.

Check that all flowers remain centered before tightening stitches.


Center Flower Placement

The two smaller flowers sit midway between the larger blooms.

Distance from neighboring flowers:

Approximately 6½ inches (16.5 cm).

Center carefully before attaching.


Optional Strengthening Round

If the runner will be used frequently:

Work one additional round of slip stitches around every joining vine.

This reinforces the construction without adding noticeable bulk.


Blocking

Wet block the completed runner.

Finished blocked dimensions:

Approximately

18 inches wide × 90 inches long
(46 × 230 cm)

Pin every petal individually.

Shape every leaf.

Straighten every vine before drying.

Allow to dry completely for 24 hours.


Finishing

Weave in all yarn ends securely.

Inspect every flower for loose stitches.

Trim any excess yarn.

Lightly steam if desired, avoiding direct contact with the crochet fabric.

Your Crochet Sunflower Table Runner is now complete and ready to display as an elegant seasonal centerpiece.

Beginner & Intermediate Tips

Although this pattern is made from simple stitches, taking your time with each motif will produce a much more polished table runner.

Keep Your Tension Consistent

The flowers are joined together after blocking. Uneven tension can make some motifs noticeably larger or smaller, causing the runner to twist. Check your flower diameter every few rounds.

Use Stitch Markers

Place a stitch marker in the first stitch of every round. This makes it much easier to maintain accurate stitch counts and prevents drifting.

Don’t Skip Blocking

Each flower and leaf should be blocked before joining. Blocking opens the stitch pattern, straightens the petals, and ensures all motifs match in size.

Sew Leaves Lightly

Attach only the base of each leaf. Leaving the tips free creates beautiful dimension and gives the runner a natural botanical appearance.

Weave Ends Securely

Because the runner may be washed and used regularly, weave every yarn end through several stitches before trimming.

Maintain Equal Spacing

Measure the distance between motifs as you assemble. Consistent spacing keeps the runner centered and symmetrical.

Cotton Yarn Works Best

Cotton provides crisp stitch definition, excellent durability, and helps the runner lie flat. Acrylic yarn can be substituted but may require additional blocking.


Pattern Measurements

  • Finished Width: 18 inches (46 cm)
  • Finished Length: 90 inches (230 cm)
  • Large Sunflower Diameter: 12 inches (30 cm)
  • Small Flower Diameter: 6 inches (15 cm)
  • Leaf Length: 4.5 inches (11.5 cm)
  • Space Between Large Flowers: 13 inches (33 cm)
  • Space Between Small and Large Flowers: 6.5 inches (16.5 cm)

Variations

1. Classic Autumn

Use cream, rust, chocolate, terracotta, mustard, olive, and forest green for a warm fall centerpiece.


2. Spring Garden

Replace the sunflower colors with soft pink, blush, ivory, lavender, and mint green to create a romantic floral runner.


3. Christmas Table Runner

Crochet poinsettia-inspired flowers in deep red with emerald green leaves and gold joining vines for a festive holiday decoration.


4. Rustic Farmhouse

Use only ivory flowers with sage leaves and natural beige vines for a neutral, year-round design that complements farmhouse décor.


5. Wedding Centerpiece

Work the motifs in white, champagne, and eucalyptus green with pearl beads sewn into the flower centers for an elegant reception table runner.


Care Instructions

  • Hand wash in cool water using mild detergent.
  • Do not bleach.
  • Roll in a towel to remove excess moisture.
  • Lay flat and reshape while damp.
  • Block after washing if needed.
  • Store flat to prevent stretching.
  • Avoid hanging the runner for long periods.

Pinterest CTA

Love this Crochet Sunflower Table Runner? Save it now so it’s ready when you’re looking for your next relaxing crochet project. Whether you’re decorating for autumn, gifting a handmade heirloom, or adding farmhouse charm to your home, this pattern is one you’ll come back to again and again. Save it to your favorite crochet board and inspire your next creation! #FoodiePlumCrochet

Leave a Reply

Your email address will not be published. Required fields are marked *